What's New?¶
This chapter gives you an overview of recent changes to the QuattroPod USB.
Newsletter
Always stay up to date: Sign up for our newsletter and learn here how to update the firmware on your device.
Receiver R01¶
2024.08.27 | 1.16163.151¶
Fixed system errors and improvements:
- Fixed system errors
2024.05.14 | 1.16163.150¶
Fixed system errors and improvements:
- Fixed system errors
2024.05.07 | 1.16163.149¶
Fixed system errors and improvements:
- Fixed system errors
2023.11.10 | 1.16163.108¶
Fixed system errors and improvements:
- Fixed system errors
2022.11.08 | 1.16163.65¶
Fixed system errors and improvements:
- Improved compatibility of the Touch-Back function
2022.10.27 | 1.16163.57¶
Fixed system errors and improvements:
- Fixed system errors
- Improved compatibility of USB cameras
- Multicast configuration protection
2022.09.08 | 1.16163.41¶
Fixed system errors and improvements:
- Improved Wi-Fi connectivity
- Improved stability of the pairing function
2022.07.03 | 1.16163.12¶
New features:
- Support for UVC camera with T03 sender
- Support for MJPEG streaming with T02+ sender
- Support for automatic Wi-Fi channel switching
- Support for WPA3 protocol
- Support for Miracast UIBC in AGO 1-to-1 mode
Fixed system errors and improvements:
- Improved compatibility of the Touch-Back function
2022.06.02 | 1.14366.129¶
New features:
- Supports 4/8-digit PIN
- 5-minute option added in the screensaver
Fixed system errors and improvements:
- Eliminated chromatic aberration under macOS
- Fixed error under Miracast
- Fixed error under Multicast: Disable Miracast in multicast mode
- Improved pairing time of sender with receiver
- Improved dual wallpaper function for the home screen
- Improved reverse control
- Improved system stability
- Miracast is enabled by default
2022.03.02 | 1.14366.90¶
New features:
- Support for resolution 1920x1200
- Support for dual wallpapers
Fixes:
- Fixed LED behavior of the receiver
- Improved reverse control
- Improved stability
2022.01.11 | 1.14366.62¶
New features:
- Support for AirPlay 'On Screen Code' for iOS, macOS, iPadOS devices
- Support for the streaming protocol Miracast
- Added warning message for device overheating
Fixed system errors and improvements:
Improved web settings:
- Added history of previously connected Wi-Fi routers in the 5GHz Wi-Fi web interface
System improvements:
- Fixed LED behavior of the sender
- Improved reverse control
- Improved Wi-Fi security against FragAttacks
- Before showing the message "Pairing OK" on the home screen, the system checks the Wi-Fi connection between the receiver and sender
2021.11.03 | 1.12412.47¶
Fixes:
- Fixed light signal
2021.07.12 | 1.12412.42¶
Fixes:
- Eliminated chromatic aberration of the RGB color space
- Default output of the receiver on 4K monitors is 4K @ 30Hz
- Fixed system errors
2021.06.25 | 1.12412.27¶
New features:
- Support for pairing via HDMI
- Support for routers using WPA3 Wi-Fi security standard
- Added timing pass-through
- Added HDCP pass-through
- Adjustable Wi-Fi signal strength
- Added new 40MHz Wi-Fi setting
Fixes:
Improved web settings:
- Set default resolution of the QuattroPod receiver to 1080P
- Added
2
and4
hour options in timed restart function
Fixed system errors and improvements:
- Reduced screen sharing latency
- Improved Wi-Fi stability
- Improved AirView performance
- Improved compatibility with 4K monitors
- Added OSD notification "Capture" during AirView
- Support for more time resolutions for QuattroPod receiver
- Support for YUV 422 for QuattroPod sender
- Updated Android APK to 1.4.56
2020.08.28 | 1.9598.72¶
New features:
- Support for the Central Management System (CMS)
- Support for automatic channel selection
- Sketch: Add notation with IFP (Interactive Flat Panel)
- One-Touch-Play: Support for HDMI CEC
- AirView: Output of the presentation image on a device or CMS overview
- Conference control: Reposition or disconnect participant screens
Fixed system errors and improvements:
- Fixed the error message “USB device not recognized” when connecting the sender to a Windows PC
- Improved screen sharing for Android devices via USB
- Improved web access protection
- Improved HDMI input compatibility
- Improved Touch-Back function stability for Windows and macOS
- Improved Wi-Fi connectivity
- Improved home screen
- Optimized RGB color space and HDMI timing
- Optimized power consumption
Sender U01 Type-A¶
2022.01.11 | 19428000¶
- Improved Windows app connectivity when Miracast protocol is enabled
- Fixed system errors and improved stability
- Fixed system errors
2021.07.13 | 19424000¶
- Fixed system errors and improved stability
2021.07.12 | 19420000¶
- Fixed system errors and improved stability
2021.06.25 | 19415000¶
- Optimized CPU resource by adding Dynamic CPU Detection
Sender U01 Type-C¶
2024.05.14 | 1.16163.149¶
Fixed system errors and improvements:
- Fixed system errors
2022.11.11 | 1.16163.65¶
Fixed system errors and improvements:
- Improved compatibility of the Touch-Back function
2022.08.15 | 1.16163.38¶
New features:
- Improved stability of the pairing function
2022.07.03 | 1.16163.12¶
New features:
- Support for pairing via QR code
2022.06.02 | 1.14366.129¶
Fixed system errors and improvements:
- Improved pairing time of sender with receiver
- Improved reverse control
2022.01.11 | 1.14366.62¶
System improvements:
- Fixed LED behavior of the sender
- Improved reverse control
- Improved Wi-Fi security against FragAttacks
- Before showing the message "Pairing OK" on the home screen, the system checks the Wi-Fi connection between the receiver and sender
2021.11.03 | 1.12412.47¶
Fixes:
- Fixed light signal
2021.07.12 | 1.12412.42¶
Fixes:
- Eliminated chromatic aberration of the RGB color space
- Fixed system errors