The supplied USB power supply (5V/2A).¶
The QuattroPod comes with a 5V/2A USB power supply. You can also use a different power supply as a spare part. Just check the output power on the nameplate that it is above the minimum current of the QuattroPod (5V/2A):
The replacement Samsung USB power adapter (5V/2A)¶
The Samsung power adapter (5V/2A) can be purchased from us if needed:
Power cable USB 2.0 type A male to 5.5/2.1 mm¶
USB power cable for the receiver can be replaced by the USB 2.0 type A male to 5.5/2.1 mm can be purchased from us if needed:
Cables and accessories¶
C14 to C13+Euro Y Type Splitter Adapter¶
If the projector is attached to the ceiling and only the power cable from the projector is available, or if you want a single cable solution from the wall outlet to the display device, the question arises how to power the projector or screen and the QuattroPod together.
With a C14 to C13+Euro Y Type Splitter Adapter, you can convert the IEC power cord to Euro power outlet and C13 cable. This in combination with the power supply can allow power for both devices.
Mounting the receiver¶
You can fix the receiver with a good tape without damaging the screen. We can recommend the UHU Doppelband:
Please note: When mounting the receiver, make sure there is a direct line of sight (LoS) between the antenna and the wireless access point and the transmitters or terminal devices to avoid Wi-Fi signal interference.