Reset QuattroPod to Factory Settings¶
There are several reasons to reset the QuattroPod to factory settings:
-
You forgot the admin password for the Advanced Settings.
-
You made changes to your network infrastructure, LAN TCP/IP settings, or the SSID credentials of the QuattroPod, and your QuattroPod is no longer accessible.
-
You are having trouble undoing an unwanted change on the QuattroPod.
Resetting will restore all settings except for the WiFi SSID, the background image of the start page, and the firmware version.
Reset via Reset Button¶
If you don’t know the login credentials for the web interface, you can use the reset button to restore the factory settings:
- Using a small "pen," press and hold the reset button for about 10 seconds.
- When the following message appears, release the reset button.
- After the reset, the country of the WiFi channel must be selected during the first login to the web interface. For devices within Europe, please select
EUROPE
. Then enter a new admin password.
Reset via Web Interface¶
Using the Advanced Settings function, you can log in and reset to factory settings using any web browser.
Login
- Note the IP address displayed at the bottom left of the start page.
- Now open your web browser.
- Click into the address bar of the browser and enter the IP address of the QuattroPod.
- After pressing the Enter key, the settings interface of the QuattroPod will appear. Enter the password. The default password is
000000
. If this password is not accepted, you must perform a Reset via Reset Button.
- The following functions are available. Select the menu item
Admin Settings
:
- Perform the
Reset to Factory Settings
function. The receiver will reboot:
- You can select exactly which devices should be reset. This does not affect the background image of the start page, the SSID, or the firmware version. Click
OK
to restart the device:
- After the receiver is reset, you must select the country of the WiFi channel during the first login to the web interface. For devices within Europe, please select
EUROPE
. Enter a new admin password and then clickApply and Reboot
to restart the device:
Note
If your transmitter cannot be unlocked after the reset, check the receiver and pair the transmitter with the receiver again.
Recommended Settings¶
The recommended settings below assume that you have already performed a reset of the receiver:
Firmware version: 1.16163.150
Device Management
- Language:
ENGLISH
- Timed Restart:
2 hours
Developer Options
Admin Settings
- WiFi Mode:
Country = EUROPE
,Channel = Auto
,Bandwidth = 20MHz
- AirView:
ON
- Miracast Support:
ON
- Miracast PIN:
ON
- Miracast PIN Mode:
4-digit random code
- Castcode:
Random
- My Screen: Landing Page in English
Background Image | Download |
---|---|
Cast Go! | Download |
QuattroPod USB | Download |
QuattroPod Standard / Deluxe / Mini | Download |
QuattroPod M1 | Download |