What`s new?¶

This chapter gives you an overview of current changes to the QuattroPod Standard.

Receiver R01¶

2022.06.02 | 1.14366.129¶

New functions:

• Supports 4/8 digits PIN code
• Adds 5min option in Screen Saver

Fixed system bugs and improvements:

• Eliminate chromatic aberration for macOS
• Fixed Miracast issue
• Fixed Multicast issue: Disable Miracast under Multicast mode
• Improved TX/RX pairing time
• Improved dual wallpaper function
• Improved reverse control
• Improved system stability
• Set Miracast ON as system default

2022.03.02 | 1.14366.90¶

New functions:

• Supports 1920x1200
• Supports dual wallpaper

Fixed system bugs and improvements:

• Fixed RX LED behavior
• Improved reverse control
• Improved system stability

2022.01.11 | 1.14366.62¶

New functions:

• Support the AirPlay On Screen Code for iOS, macOS, iPadOS devices.
• Support the streaming protocol Miracast
• Added warning message when the device overheats

Fixed system bugs and improvements:

Improved web settings:

• Adding a history of previously connected Wi-Fi routers on the 5Ghz Wi-Fi web interface.

System improvements:

• Fixed the LED behavior of the transmitters
• Improved Reverse Control
• Improved Wi-Fi security against FragAttacks
• Before the "Pairing OK" message is displayed on the landing page, the system checks the Wi-Fi connection between the receiver and the transmitter.

2021.11.03 | 1.12412.47¶

Fixes:

• Light signal fixed

2021.07.12 | 1.12412.42¶

Fixes:

• Elimination of chromatic aberration of RGB color space.
• For 4K monitors, the default output of the receiver is 4K @ 30Hz.
• System error fixed

2021.06.18 | 1.12412.27¶

New functions:

• Support for pairing through HDMI
• Support for routers via Wi-Fi security standard WPA3
• Timing pass-through added
• HDCP pass-through added
• Wi-Fi signal strength adjustable
• Added new setting of Wi-Fi 40Mhz

Fixes:

Improved web settings:

• Default resolution of QuattroPod receiver set to 1080P.
• Added 2 and 4 hours settings in Timed restart function

Fixed system bugs and improvements:

• Reduced latency of screen transmission
• Improved Wi-Fi stability
• Improved AirView performance
• Improved compatibility with 4K monitors
• Added OSD "Capture" notification during AirView
• Support for more time resolutions for QuattroPod receivers
• YUV 422 support for QuattroPod transmitters
• Update Android APK 1.4.56

2020.08.28 | 1.9598.72¶

New functions:

• Support for Central Management System (CMS).
• Support for automatic channel selection
• Sketch: Add notation with IFP (Interactive Flat Panel)
• One-Touch-Play: Support for HDMI CEC
• AirView: One image output of the presentation on a terminal or on the CMS overview
• Conference control: Reposition or separate screens of participants

Fixed system bugs and improvements:

• Fixed the error message "USB device was not detected" when connecting the transmitter to a Windows PC.
• Improved screen transfer for Android devices via USB
• Improved web access protection
• Improved HDMI input compatibility
• Improved touch back stability for Windows and macOS
• Improved Wi-Fi connectivity
• Improved landing page
• Optimized RGB color space and HDMI timing
• Optimized power consumption

2020.05.14 | 1.8529.10¶

New functions:

• Split screen via Chromecast: Stream screen natively from up to 4 Google Cast devices on a split screen.
• Dynamic wallpaper: Customize home screen with images and video
• Multicast: A broadcast from one screen or from one transmitter to multiple displays
• Wireless network installation test: Scan your Wi-Fi environment and optimize wireless transmission performance

Fixes:

• Improved stability of the touch-back function
• HTTPS support for secure Internet access
• Improved split screen layout
• Added the following selection during initial installation to optimize Wi-Fi adapter settings:

Transmitter T01¶

2022.06.02 | 1.14366.129¶

Behobene Systemfehler und Verbesserungen:

• Improved TX/RX pairing time
• Improved reverse control

2022.03.02 | 1.14366.87¶

System-Verbesserungen:

• Improved reverse control
• Improved system stability

2022.01.11 | 1.14366.62¶

System improvements:

• Fixed the LED behavior of the transmitters
• Improved Reverse Control
• Improved Wi-Fi security against FragAttacks
• Before the "Pairing OK" message is displayed on the landing page, the system checks the Wi-Fi connection between the receiver and the transmitter.

2021.11.03 | 1.12412.47¶

Fixes:

• Light signal fixed

2021.07.12 | 1.12412.42¶

Fixes:

• Elimination of chromatic aberration of RGB color space
• System error fixed