Zum Inhalt

What`s new?

This chapter gives you an overview of current changes to the QuattroPod Mini.

Newsletter

Always up to date: Subscribe to our newsletter and learn here how to update the firmware on your device.

Receiver R01

2022.06.02 | 1.14366.129

New functions:

  • Supports 4/8 digits PIN code
  • Adds 5min option in Screen Saver

Fixed system bugs and improvements:

  • Eliminate chromatic aberration for macOS
  • Fixed Miracast issue
  • Fixed Multicast issue: Disable Miracast under Multicast mode
  • Improved TX/RX pairing time
  • Improved dual wallpaper function
  • Improved reverse control
  • Improved system stability
  • Set Miracast ON as system default

2022.03.02 | 1.14366.90

New functions:

  • Supports 1920x1200
  • Supports dual wallpaper

Fixed system bugs and improvements:

  • Fixed RX LED behavior
  • Improved reverse control
  • Improved system stability

2022.01.11 | 1.14366.62

New functions:

  • Support the AirPlay On Screen Code for iOS, macOS, iPadOS devices.
  • Support the streaming protocol Miracast
  • Added warning message when the device overheats

Fixed system bugs and improvements:

Improved web settings:

  • Adding a history of previously connected Wi-Fi routers on the 5Ghz Wi-Fi web interface.

System improvements:

  • Fixed the LED behavior of the transmitters
  • Improved Reverse Control
  • Improved Wi-Fi security against FragAttacks
  • Before the "Pairing OK" message is displayed on the landing page, the system checks the Wi-Fi connection between the receiver and the transmitter.

2021.11.03 | 1.12412.47

Fixes:

  • Light signal fixed

2021.07.12 | 1.12412.42

Fixes:

  • Elimination of chromatic aberration of RGB color space.
  • For 4K monitors, the default output of the receiver is 4K @ 30Hz.
  • System error fixed

2021.06.18 | 1.12412.27

New functions:

  • Support for pairing through HDMI
  • Support for routers via Wi-Fi security standard WPA3
  • Timing pass-through added
  • HDCP pass-through added
  • Wi-Fi signal strength adjustable
  • Added new setting of Wi-Fi 40Mhz

Fixes:

Improved web settings:

  • Default resolution of QuattroPod receiver set to 1080P.
  • Added 2 and 4 hours settings in Timed restart function

Fixed system bugs and improvements:

  • Reduced latency of screen transmission
  • Improved Wi-Fi stability
  • Improved AirView performance
  • Improved compatibility with 4K monitors
  • Added OSD "Capture" notification during AirView
  • Support for more time resolutions for QuattroPod receivers
  • YUV 422 support for QuattroPod transmitters
  • Update Android APK 1.4.56

2020.08.28 | 1.9598.72

New functions:

  • Support for Central Management System (CMS).
  • Support for automatic channel selection
  • Sketch: Add notation with IFP (Interactive Flat Panel)
  • One-Touch-Play: Support for HDMI CEC
  • AirView: One image output of the presentation on a terminal or on the CMS overview
  • Conference control: Reposition or separate screens of participants

Fixed system bugs and improvements:

  • Fixed the error message "USB device was not detected" when connecting the transmitter to a Windows PC.
  • Improved screen transfer for Android devices via USB
  • Improved web access protection
  • Improved HDMI input compatibility
  • Improved touch back stability for Windows and macOS
  • Improved Wi-Fi connectivity
  • Improved landing page
  • Optimized RGB color space and HDMI timing
  • Optimized power consumption

2020.05.14 | 1.8529.10

New functions:

  • Split screen via Chromecast: Stream screen natively from up to 4 Google Cast devices on a split screen.
  • Dynamic wallpaper: customize the home screen with images and video
  • Multicast: A broadcast from one screen or from one transmitter to multiple displays
  • Wireless network installation test: Scan your Wi-Fi environment and optimize wireless transmission performance

Fixes:

  • Improved stability of the touch-back function
  • HTTPS support for secure Internet access
  • Improved split screen layout
  • Added the following selection during initial installation to optimize Wi-Fi adapter settings:

Transmitter T02

2022.06.02 | 1.14366.129

Behobene Systemfehler und Verbesserungen:

  • Improved TX/RX pairing time
  • Improved reverse control

2022.03.02 | 1.14366.87

System-Verbesserungen:

  • Improved reverse control
  • Improved system stability

2022.01.11 | 1.14366.62

System improvements:

  • Fixed the LED behavior of the transmitters
  • Improved Reverse Control
  • Improved Wi-Fi security against FragAttacks
  • Before the "Pairing OK" message is displayed on the landing page, the system checks the Wi-Fi connection between the receiver and the transmitter.

2021.11.03 | 1.12412.47

Fixes:

  • Light signal fixed

2021.07.12 | 1.12412.42

Fixes:

  • Elimination of chromatic aberration of RGB color space
  • System error fixed